Tính Năng:
The Innodisk CFast 3SE operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 470MB/sec. and of sequential write up to 250MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 30% power consumption. It is featured as small form factor, and suitable for most industrial application.
CFast 3SE can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. It support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk’s enhanced power cycling technology and more capacitors, CFast 3SE prevents data loss caused by sudden power failure. By using Innodsik’s iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.
| Model Name | CFast 3SE |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | SLC |
| Type | Standard |
| Capacity | 1GB~64GB |
| Sequential R/W (MB/sec, max.) | 470/250 |
| Max. Power Consumption | 1W |
| Max. Channels | 4 |
| Thermal Sensor | Optional |
| H/W Write Protect | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 42.8 x 36.4 x 3.6 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
#innodiskcfast3se #cfast3se #3secfastinnodisk
Từ khóa: cfast3se
